|
|
Superlife 316 DTMR
Steel Tuff 316
Steel Plus 316Epoxy
Steel Plus CE
<-Back to Products
| Superlife 316 DTMR |
Superlife-316 DTMR is our direct to metal version of the Superlife-316 above. It too, is a blend of acrylic resins and 316 stainless steel flake and has the ability to adhere to all of the surfaces above, including bare steel. It also has the ability to adhere to surfaces with slight contamination of oil or grease. In addition, Superlife-316 DTMR has an extremely fast cure time so it is ideal for painting in production situations. In severe duty applications, we recommend one of our water base primers prior to topcoating with Superlife-316 DTMR. VOC compliant. USDA accepted. available in metallic gray and limited other metallic colors.
Product Number 10-0318
Available in the following containers and cases:
| Product No. |
Container Size |
Case Qty |
Case Wt. |
| 10-0318-01 |
Gallon |
4 |
41 |
| 10-0318-05 |
5 Gallon Pail |
1 |
51 |
|
View the Product Data Sheet:   |
|
<-Back to Products ^Back To Top^
| Steel Tuff-316 |
Chemically similar to Superlife 316 DTMR, Steel Tuff 316 has all of the attributes of DTMR but with substantially increased early hardness of the film. It was designed for OEM's that paint component parts and need to put those parts into assembly quickly. USDA accepted. Available in metallic gray.
Product Number 10-0320
Available in the following containers and cases:
| Product No. |
Container Size |
Case Qty |
Case Wt. |
| 10-0320-01 |
Gallon |
4 |
41 |
| 10-0320-05 |
5 Gallon Pail |
1 |
51 |
|
| View the Product Data Sheet: |
|
<-Back to Products ^Back To Top^
| Steel Plus 316 Epoxy |
Steel Plus 316 is a two component, water base epoxy filled with 316 stainless steel flake. It is our most chemical resistant product and is designed for severe duty applications. Steel Plus 316 is a 3 to 1 mix and requires no induction time before painting. Steel Plus 316 is based on the newest epoxy technology allowing us to formulate an extremely high performance coating in a non-HAP and low VOC formula. Steel Plus 316 has exceptional moisture and chemical resistance, is easy to apply, dries quickly and has a fast recoat time. It can be used direct to metal but will provide higher performance when used with Steel Plus P epoxy primer. It is USDA and FDA accepted and is well suited for both plant maintenance and OEM applications.
Product Number 10-810
Available in the following containers and cases:
| Product No. |
Container Size |
Case Qty |
Case Wt. |
| 10-810A-01 |
Gallon Kit |
4 |
42 |
| 10-810A-05 |
5 Gallon Kit |
1 |
53 |
|
| View the Product Data Sheet: |
|
<-Back to Products ^Back To Top^
| Steel Plus CE 316 |
Steel Plus CE 316 is a two component, water base epoxy filled with 316 stainless steel flake. It is our most chemical resistant, Bis-F type epoxy product and is designed for extremely severe duty applications. Steel Plus CE 316 is a 2 to 1 mix and requires no induction time before painting. Steel Plus CE 316 is based on the newest technology, allowing us to formulate an extremely high performance coating in a non-HAP and low VOC formula. We use an aliphatic amine curatuve enabling much higher crosslinking density which gives Steel Plus CE 316 its exceptional moisture and chemical resistance. Steel Plus CE 316 is easy to apply, dries quickly and has a fast recoat time. It can be used direct to metal, but will provide higher performance when used with Steel Plus Epoxy Primer. It is USDA and FDA accepted and is well suited for both plant maintenance and OEM applications.
Product Number 10-808
Available in the following containers and cases:
| Product No. |
Container Size |
Case Qty |
Case Wt. |
| 10-808A |
Gallon Kit |
4 |
38 |
| 10-808A |
5 Gallon Kit |
1 |
50 |
|
| View the Product Data Sheet: |
|
|
